Strata and body corporate meeting printing needs to be accurate, clearly ordered and easy for owners to work through during the meeting. For an AGM, general meeting or strata committee meeting, that can mean printing notices, agendas, financial statements, budgets, voting papers, maintenance information, proposed motions and supporting papers — sometimes in substantial quantities.

Print Online prints A4, A3 and A5 documents in black and white or colour, A4 and A5 booklets, and document finishing including ring binding, stapling and hole punching, from Sydney for strata managers, owners corporations and committees Australia-wide.

Terminology and meeting rules differ between states — strata schemes, owners corporations, body corporates and community schemes are each governed by their own state legislation — so confirm the requirements for your scheme with your strata manager before finalising any pack. This guide covers the printing side.

What documents might you print for a strata meeting?

A meeting pack can contain several different document types, depending on the meeting and the matters being considered:

  • Meeting notice and agenda
  • Previous meeting minutes
  • Chair's and committee reports
  • Financial statements and budgets
  • Levy or contribution information
  • Capital works or sinking fund plans
  • Insurance information
  • Proposed motions
  • Supporting quotations or reports
  • By-laws
  • Proxy forms and voting papers
  • Committee nomination information
  • Building, defect or consultant reports
  • Plans and diagrams

The exact documents required — and any prescribed forms — depend on your state's strata legislation and the meeting itself, so confirm the pack contents before printing.

What is the most economical way to print a strata AGM pack?

For a largely text-based AGM pack, A4 black-and-white printing on 80gsm Budget is usually the most economical starting point. Use colour only where it helps, print double-sided where appropriate and keep the page count tight. Page count and quantity are the two decisions that most affect the size of the job, so edit duplicated material and confirm which owners genuinely need a printed copy before ordering.

When should you use colour printing?

Use colour where it helps owners interpret information, not automatically across the entire meeting pack. Colour is useful for defect and maintenance photographs, building-condition reports, plans, maps, charts, insurance diagrams, highlighted work areas, comparative quotations and proposed design changes.

A 60-page meeting pack may only contain five pages where colour really matters. One practical approach is to print the main pack in black and white and supply colour-dependent reports as a separate colour document. Before converting documents to greyscale, check that colour-coded charts or annotations remain understandable.

Should meeting packs be single-sided or double-sided?

Double-sided printing can reduce the physical size of a large meeting pack significantly. A4 and A3 document printing is available either way. A 100-page PDF printed single-sided uses about 100 sheets; double-sided, roughly half, depending on page setup and intentional blanks. That makes AGM packs easier to carry and distribute, less bulky on the meeting table and lighter on paper.

What paper should you use for AGM documents?

Paper Available for Use it for
80gsm Budget A4, A3, A5 Long meeting packs and working copies
100gsm Standard A4, A3, A5 Packs printed double-sided (less show-through)
120gsm Premium A4, A3, A5 Annual summaries and owner guides
200gsm A4, A3 Cover sheets, dividers, noticeboard notices
300gsm A4, A3 Durable lobby signs and reusable building information

Using heavy stock for every page of a 100-page pack adds bulk without improving usability. Keep heavier stocks for covers, dividers and pieces that get handled repeatedly.

Should strata packs be stapled, punched or bound?

The best finishing depends on page count and how owners need to use the pack:

Finishing Good for
Corner staple (any corner) Short notices, agendas and supporting papers
2- or 4-hole punching Committee members' folders and building records
Plastic ring binding Longer AGM packs owners need to move through during debate

Ring binding comes with no covers, a clear front cover, a card back, or a clear front cover plus card back. A clear front cover plus card back keeps the pack tidy throughout a long meeting.

Can a strata meeting pack be printed as a booklet?

Yes. Booklet printing suits shorter meeting documents, annual summaries, owner guides or concise AGM packs. Print Online booklets come in A4 or A5, black and white or colour, on 80gsm Budget (up to 200 pages) or 100gsm Standard and 120gsm Premium (up to 80 pages).

Booklets work well for annual summaries, new-owner and resident information packs, by-law guides, building handbooks, shorter AGM packs and committee information. For a working pack with frequent annotations and section-by-section navigation, ring binding is usually more practical.

Booklet or ring binding: which is better for an AGM?

Feature Booklet Ring-bound document
Appearance Publication-style Working-document style
Useful for Shorter, sequential documents Larger meeting packs
Lies flat Not fully Yes
Page capacity Up to 80 pages (100/120gsm) or 200 pages (80gsm) Suits longer packs
Good for annotations Reasonable Very practical
Best example Annual summary or owner guide Full AGM working pack

If owners need to jump between page 8, page 45 and page 92 during debate, ring binding is easier to use.

When should you use A3 printing for strata meetings?

A3 is useful when an A4 page would make important information too small to read. A3 is available in black and white or colour and suits capital works plans, building plans, site maps, large financial tables, project programs, contractor diagrams, remedial-work layouts and insurance plans. Don't shrink a detailed spreadsheet to the point where owners need a magnifying glass — an A3 insert can be a better meeting document.

For architectural or engineering drawings at true scale, Plan Prints are designed for line drawings — A4/A3 in black and white or colour, and A2, A1 and A0 in colour, printed at actual size from a PDF. They're a low-ink product, so photographs and solid colour belong on Poster Prints instead.

How should financial statements be printed?

Financial information should be clear before it is compact. Check that columns remain aligned, totals are easy to identify, notes remain readable, page breaks don't separate headings from figures, negative amounts are clear, units and periods are obvious and charts reproduce correctly. If a table was designed for a wide spreadsheet, consider A3.

How should proxy forms and voting papers be printed?

Some states prescribe forms for proxies and voting, so use the current form that applies to your scheme. For practical printing, keep these documents easy to separate, complete and return:

  • Place voting papers at the end of the pack.
  • Label them clearly.
  • Keep return instructions away from the page edges.
  • Keep form fields large enough to complete by hand.
  • Check whether the page must be returned in full.
  • Avoid graphics behind writing areas.

If you want forms to be easy to remove from a ring-bound pack, print them as a separate stapled document instead.

Can you use colour-coded voting papers?

Colour-coded voting papers can help administratively, but don't rely on colour alone to identify different motions. Label each document clearly in text — MOTION 1 — LIFT REPLACEMENT is safer than "the blue sheet". This also helps when documents are photocopied, scanned or read by someone with colour-vision differences.

How should motions be presented?

Make each proposed motion easy to identify and distinguish from explanatory material. A meeting pack could use:

Motion 1 — Insurance Renewal
[Exact motion wording]
Explanatory note — supporting information
Financial implications — where relevant
Supporting documents — reference to report or quotation

The exact wording and procedural treatment of motions should follow the requirements applicable to your scheme. From a print perspective, keep the motion itself visually distinct so owners aren't left wondering which paragraph they're voting on.

How can you make a large meeting pack easier to navigate?

For longer packs, add structure: a contents page, page numbers, section headings, divider pages, consistent numbering, cross-references and clear appendices. For example:

  • Section 1 — Meeting documents — Pages 1–12
  • Section 2 — Financial statements — Pages 13–34
  • Section 3 — Capital works and maintenance — Pages 35–51
  • Section 4 — Proposed motions — Pages 52–61
  • Section 5 — Voting papers — Pages 62–65

Printing divider pages on 200gsm makes sections easier to find in a ring-bound pack.

How should you prepare one bound AGM pack?

Upload one PDF with every page in order — multiple uploaded files may print out of order. A good workflow is:

  1. Finalise all meeting papers.
  2. Put them into the correct sequence.
  3. Add the contents page.
  4. Confirm pagination.
  5. Insert intentional blank pages if required.
  6. Export one master PDF (Word documents: save as PDF).
  7. Open that PDF separately and check every section.
  8. Upload the master file.
  9. Check the online preview.

Use a clear filename such as SP12345-AGM-Pack-2026-APPROVED.pdf — much safer than uploading ten separate PDFs and hoping they print in the right order.

Managing several schemes?

Strata managers looking after several buildings can save time by standardising the specification for each document type — for example, every AGM pack as A4 black and white, double-sided, 80gsm, ring-bound with a clear front cover and card back. Keep a separate approved PDF per scheme, clearly named with the plan number, and order each one against the same settings.

Can you print meeting notices separately from the full pack?

Yes. A separate notice is useful if it needs to be posted, displayed or distributed differently from the supporting papers. A colour notice on 200gsm or 300gsm helps on lobby noticeboards, building entrances and resident information boards. Standard prints have a white border, so keep text inside a comfortable margin.

Can Print Online produce posters for building noticeboards?

Yes. A3 and A4 notices print through document printing, and larger Poster Prints come in A2, A1 and A0 on 140gsm Coated Matt, 200gsm Satin or 135gsm Duraprint. Duraprint is water, grease and tear resistant — handy for car parks, bin rooms, pool areas and other spots that get damp or knocked about. Use posters for meeting reminders, planned maintenance, water shutdowns, lift outages, contractor access notices, building events and major project updates. Use large type and keep the message specific.

How can strata managers reduce printing?

Start by separating what genuinely needs a physical copy from what can be distributed electronically, where your scheme's rules allow. Then look at the specification.

Use black and white for text-heavy pages

Most of a meeting pack is text and tables.

Print double-sided

This reduces physical bulk for longer packs.

Use colour selectively

Keep it for photographs, diagrams and information where colour adds meaning.

Confirm quantity

Confirm which owners have asked for or need a physical copy.

Edit duplicate material

Avoid including the same report twice under different sections.

Combine files before binding

This also reduces page-order mistakes.

Choose booklet printing where appropriate

Booklets suit shorter publication-style material such as owner guides.

When should you finalise the meeting pack?

Don't plan to have packs in hand at the last possible moment. Allow time to check the printed documents, correct any administrative mistake, distribute copies and meet the notice period that applies to your meeting. Printing doesn't replace meeting-planning requirements — build it into the timetable.

What should you check before ordering an AGM pack?

  • Correct strata plan or scheme number, meeting date and venue or meeting method
  • Correct agenda and owner-facing instructions
  • Previous minutes
  • Approved financial statements, budget figures and levy information
  • Motion wording and supporting reports
  • Proxy forms and voting papers where applicable
  • Committee nomination information
  • Page numbers, contents page, blank pages and orientation
  • Quantity

For legal or procedural content, have the appropriate person confirm the meeting documentation is correct before it reaches the printer.

How should print-ready files be prepared?

File specification Requirement
File type PDF recommended (Word/Publisher: save as PDF)
Structure One ordered PDF per pack
Resolution 150–300dpi for scans and photos
Colour CMYK for colour pages
Fonts Embedded
Marks No trim or registration marks

Before uploading, check fonts render correctly, landscape pages aren't cropped, page order is right, scans are legible, colour-dependent pages are clear and the page count is final. Open the exported PDF rather than checking only the Word file.

Why should you check the uploaded preview?

Files aren't manually checked, so the preview is your proof. For a meeting pack, check at least the first page, last page, page count, orientation, section order, cropping, blank pages and colour pages. If the preview says 58 pages and your approved pack has 62, stop and investigate before ordering.

What are the most common strata printing mistakes?

Printing an outdated meeting pack. Maintain one approved master PDF.

Missing an attachment. Compare the contents page with the final file.

Printing the wrong quantity. Confirm who actually needs a paper copy.

Using colour for everything. Reserve colour for pages where it adds value.

Making financial tables too small. Use A3 where necessary.

Uploading multiple files for one bound pack. Separate files may print out of order.

Incorrect page references. Update the contents page after all documents are final.

Forgetting voting papers. Check the final pack against the meeting requirements for your state.

Leaving printing too late. Build contingency into the notice timetable.

Failing to check the preview. Your uploaded file needs to be correct.

Frequently asked questions about strata meeting printing

What is the best way to print an AGM pack?

For most text-heavy packs: A4 black and white, double-sided, 80gsm or 100gsm, in one ordered PDF, ring-bound for longer packs. Use colour and A3 selectively for plans, photographs and wide tables.

What binding options are available?

Plastic ring binding (no covers, clear front cover, card back, or clear front cover plus card back), corner stapling, and 2- or 4-hole punching.

Can an AGM pack be printed as a booklet?

Yes. A4 and A5 booklets are available — up to 200 pages on 80gsm Budget, or up to 80 pages on 100gsm and 120gsm.

Can proxy forms and voting papers be included?

Yes — within the meeting pack or printed separately. Use the current form that applies under your state's strata legislation.

Can I print A3 financial tables and plans?

Yes. A3 is available in black and white or colour, and Plan Prints cover scale drawings up to A0.

Print your strata meeting packs with Print Online

A well-prepared meeting pack should help owners find information quickly, understand what is being discussed and work through the meeting without document confusion.

For a text-heavy AGM, start with black-and-white A4. Use colour selectively for plans, photographs and charts. Consider A3 for wide financial or capital works information, and use ring binding when the pack needs to stay organised throughout the meeting. Then assemble one approved master PDF, check the pagination and voting papers, and inspect the upload preview before ordering.

Order A4 Document Printing →

November 16, 2026 — Print Online