When you need printed architectural, building or planning drawings for a development application (DA) or council submission, the most important thing is preserving the intended scale of the plans. Print Online's dedicated Plan Prints are printed at actual size and scale rather than fitted to the sheet, in A4 and A3 (black and white or colour) and A2, A1 and A0 (colour).

That makes Plan Prints suitable for architectural and construction drawings where dimensions, scale bars, annotations and linework need to remain readable.

You can choose 80gsm Bond, 120gsm Coated Bond or 135gsm Duraprint, a water-, grease- and tear-resistant material.

Before printing anything for a DA, confirm the required drawing sizes, scales, number of sets and documentation with your local council, the relevant state planning portal, or the architect, designer, planner or other professional managing your application.

What size should DA and council plans be printed?

The correct size is the sheet size the drawing was designed to be printed at. The common large-format plan sizes are:

Plan size Dimensions Typical use
A3 297 × 420mm Reduced sets, smaller drawings and details
A2 420 × 594mm Smaller drawing sets and details
A1 594 × 841mm Architectural and construction plans
A0 841 × 1189mm Large drawings and detailed plan sets

Don't simply choose A1 because it seems like a sensible size for building plans. Look at the drawing title block and documentation supplied by your architect, designer or other project professional. It should identify the intended sheet size and drawing scale.

If a drawing has been prepared as A1, print it at A1 unless the person responsible for the submission has specifically told you otherwise.

Why does plan scale matter?

A drawing scale describes the relationship between a measurement on the printed drawing and the corresponding real-world measurement.

Architectural and construction drawings may use different scales depending on what is being shown. A site plan, floor plan and detailed construction drawing do not necessarily use the same scale, and changing the physical size of the sheet can affect the printed scale.

Print Online's Plan Prints are printed at actual size and scale. Always check the finished print against the scale information on the drawing rather than assuming it is correct simply because the sheet looks right.

What is the difference between "actual size" and "fit to page"?

Actual-size printing preserves the dimensions of the supplied artwork. Fit-to-page printing changes the artwork size to fit the available sheet.

Print Online's standard A4, A5, A3, photo, basic booklet and poster products print fit-to-page with a white border. That's fine for an office document but not for a scaled drawing. For architectural and construction drawings where scale matters, use the dedicated Plan Prints product.

What happens if you upload the wrong plan size?

If you order an A1 plan from an A4 file, the artwork will be scaled up to A1. Choosing a large sheet size does not prove that your source PDF was created correctly for that sheet.

Before uploading, check:

  • Intended sheet size
  • Drawing scale
  • Title block
  • Revision number
  • Page count
  • Drawing numbers
  • Orientation
  • Whether the complete drawing is visible
  • Whether the PDF contains the final approved-for-lodgement version

If you're unsure about the intended sheet size or scale, ask the person who prepared the drawings before printing.

A0 vs A1 vs A2 plan printing

Size Dimensions Compared with A1 When to use it
A2 420 × 594mm Half the area of A1 When the drawing was designed for A2
A1 594 × 841mm Reference size When the drawing was designed for A1
A0 841 × 1189mm Twice the area of A1 When the drawing was designed for A0

The ISO A-series is proportional, which makes resizing convenient, but that doesn't mean resizing a scaled plan is appropriate. For submission printing, follow the intended sheet size.

Which paper should you choose for DA plans?

Plan paper Description Consider it when
80gsm Bond Standard lightweight plan paper You need conventional submission or office plan sets
120gsm Coated Bond Heavier coated paper Plans will receive more handling
135gsm Duraprint Water-, grease- and tear-resistant Plans may also be used on site or in tougher conditions

For a straightforward set of plans reviewed indoors, 80gsm Bond may be sufficient. 120gsm Coated Bond provides a more substantial sheet if the drawings will be handled repeatedly. Duraprint is more specialised and useful when a drawing set needs to survive conditions beyond an office or meeting room — see site drawing printing with Duraprint.

Do DA plans need to be printed in colour?

That depends on the drawings and submission requirements. Some drawings primarily use black linework; others rely on colour to distinguish overlays, annotations, services or different parts of a design.

A4 and A3 Plan Prints can be black and white or colour; A2, A1 and A0 Plan Prints are colour. Plan Prints use a low-ink colour process designed for linework. Don't convert a colour drawing to black and white without checking whether colour communicates information that matters.

Are Print Online Plan Prints suitable for architectural drawings?

Yes. Plan Prints are best for line drawings with under about 50% ink coverage, such as architectural, construction and engineering drawings.

Architectural drawings generally consist of linework, text, dimensions, hatching and relatively low ink coverage. A large photograph, rendered visualisation or sheet dominated by solid colour has different print requirements.

When should you use Poster Prints instead of Plan Prints?

Use Plan Prints for technical line drawings. Use Poster Prints for photos, renders and solid colour.

Plan Prints aren't intended for photographs or solid-colour artwork. A presentation board containing large photographic renders is better printed as a Poster Print in A2, A1 or A0, on 140gsm Coated Matt, 200gsm Satin or 135gsm Duraprint, with Low, Standard or High ink quality options. If your DA package contains a mixture of technical drawings and visualisations, you may need different products for different sheets.

Should plans have a white border?

Technical drawings are different from full-bleed marketing products such as flyers. What matters is that the complete drawing, title block, notes and scale information are reproduced correctly. Avoid modifying a professional drawing file merely to create edge-to-edge printing; submit the PDF according to its intended page dimensions.

How accurate is the finished paper size?

Large-format paper can move slightly during printing and trimming, so don't rely on the outer dimensions of the sheet alone when checking a technical drawing. Review the scale information and scale bar after printing, and follow the project professional's instructions where exact dimensions are critical.

How should you prepare a PDF for plan printing?

Plan Prints accept PDF files only. Use the final PDF supplied by the professional who created the drawings rather than re-exporting it unnecessarily. Before uploading, check:

  • You have the latest revision. Compare drawing numbers and revisions with the current drawing register.
  • The page size is correct. Confirm whether each drawing was created as A3, A2, A1 or A0.
  • The scale is correct. Read the title block and scale information.
  • All sheets are present. Check the page count against the drawing set.
  • Nothing is cropped. Review every page.
  • Text is readable. Check dimensions, notes and annotations at normal viewing size.
  • Fonts are embedded.
  • The correct colour information is present.
  • The orientation is correct.
  • Unwanted markup has been removed.
  • The submission requirements have been confirmed. Printing correctly doesn't guarantee the drawing set satisfies council requirements.

Avoid editing the plans unless you're authorised and know exactly what needs to change.

Should you combine multiple plan files into one PDF?

Yes. Multiple uploaded files may print out of order, so upload one multi-page PDF with the pages already arranged in the correct sequence, for example a cover sheet followed by site, floor, elevation and detail drawings according to your drawing register.

How many sets of DA plans should you print?

There is no universal number of printed sets for an Australian DA. Many councils and state planning portals now take digital lodgement, and requirements vary by council, state, application type and project. Before ordering, establish who actually needs a physical set:

  • Property owner
  • Architect or designer
  • Town planner
  • Engineer
  • Builder
  • Certifier or other consultants
  • Site team
  • Meetings or neighbour consultation
  • Council, if physical copies have specifically been requested

Don't print multiple large-format sets simply because that used to be standard practice. Confirm what is actually required first.

Can you print extra plan sets for the builder or site?

Yes, and this is where a print-ready master PDF becomes useful. Once the final drawing set is confirmed, you can order additional copies for project stakeholders. For site use, consider 120gsm Coated Bond or 135gsm Duraprint. Make sure everyone receives the correct revision: an old set of drawings on site can create far larger problems than reprinting.

Leave time to check your files

For a fixed council, meeting or lodgement deadline, plan ahead so you have time to:

  • Confirm the correct drawing revision
  • Review the PDF
  • Confirm page sizes and scales
  • Upload the file and check the preview
  • Confirm the number of copies

A drawing set printed from yesterday's superseded revision isn't useful, however quickly it was ordered.

How do you order DA plans from Print Online?

  1. Open Plan Prints on Print Online.
  2. Upload your PDF.
  3. Check the detected page count.
  4. Enter the number of copies required.
  5. Choose the required plan size and colour option.
  6. Select 80gsm Bond, 120gsm Coated Bond or 135gsm Duraprint.
  7. Review the file preview carefully.
  8. Confirm that the plans are the correct revision, size and scale.
  9. Add the job to your cart and complete the order.

Files aren't manually checked, so the upload preview is your proof. That makes checking the preview and source PDF particularly important for technical drawings.

DA plan printing checklist

  • Correct project: check the property and project details.
  • Latest revision: no superseded drawings included.
  • Correct page count: compare with your drawing register.
  • Correct sheet size: A3, A2, A1 or A0 for each drawing.
  • Correct scale: check the title block and scale information.
  • Correct colour: preserve colour where it communicates required information.
  • Readable annotations: dimensions, notes and labels.
  • Complete title blocks: nothing cropped.
  • Correct orientation: check every page.
  • Correct number of copies: confirm who needs a physical set.
  • Correct paper: 80gsm Bond, 120gsm Coated Bond or Duraprint for the intended use.
  • One ordered PDF uploaded and preview checked.
  • Council requirements confirmed directly with your local council, state planning portal or project professional.

Frequently asked questions

Can Print Online print A0 architectural plans?

Yes. Plan Prints are available in A2 (420 × 594mm), A1 (594 × 841mm) and A0 (841 × 1189mm) in colour, plus A4 and A3 in black and white or colour.

Does Print Online print plans to scale?

Plan Prints are printed at actual size and scale. You still need to supply the correct PDF and select the appropriate plan size, and check the scale on the finished drawing.

What paper should I use for building plans?

80gsm Bond suits ordinary plan sets, 120gsm Coated Bond provides a heavier sheet, and 135gsm Duraprint is water-, grease- and tear-resistant for more demanding environments.

Can I print photographs or architectural renders as Plan Prints?

Plan Prints are intended for line drawings with under about 50% ink coverage. For photographs, renders and solid colour, use Poster Prints.

How many copies do I need for a DA?

There is no single number for every Australian council. Confirm current requirements with your council, state planning portal or the professional managing the application.

Should I resize an A1 drawing to A2?

Not without confirming that resizing is acceptable. Reducing A1 to A2 changes the physical scale of the drawing. For plans where scale matters, print at the sheet size specified by the person who prepared the drawing.

Print your DA plans online with Print Online

When you're printing plans for a DA, building project or planning meeting, getting the correct drawing onto the correct sheet at the intended scale matters more than simply choosing a large paper size.

Start with the final drawing set supplied by your architect, designer or project professional. Confirm the revision, sheet sizes, scales and number of copies. Then use Print Online's dedicated Plan Prints, printed at actual size on 80gsm Bond, 120gsm Coated Bond or 135gsm Duraprint.

Most importantly, confirm your council's current lodgement requirements before printing. Print Online reproduces the drawing set you supply; which drawings, scales and copies your application requires is a matter for the council and the professionals responsible for your project. See also printing architectural drawing sets.

Order Plan Prints →

November 16, 2026 — Print Online