How to Print a Training Manual or Employee Handbook
The best way to print a training manual or employee handbook is to choose the format around how often people use it, how frequently the content changes and how many pages it contains. A short handbook works well as an A4 or A5 booklet, while a longer working manual is usually better as an A4 document with plastic ring binding so it can stay open during training.
Print Online prints from Sydney for businesses Australia-wide, with A4, A5 and A3 document printing in black and white or colour, booklet printing, plastic ring binding, corner stapling and hole punching — practical ways to produce induction guides, SOP manuals, WHS material, franchise handbooks and internal training documents without relying on the office printer.
What is the best format for a training manual?
For most working manuals, A4 printing with plastic ring binding is the practical starting point. A4 has room for text, screenshots, tables and diagrams, and ring binding keeps the document open during a session.
Ring binding comes with four cover options: no covers, clear front cover, card back, or clear cover plus card back. Documents can also be 2- or 4-hole punched for a ring binder, or finished with a corner staple in any corner.
Ring binding suits manuals with step-by-step procedures, screenshots, checklists, WHS information, equipment instructions, SOPs, training exercises, forms, troubleshooting guides and reference tables. Being able to leave the manual open on a desk matters more than making it look like a magazine.
When should an employee handbook be printed as a booklet?
A shorter handbook works well as an A4 or A5 booklet when it's read from beginning to end rather than used as an open reference. Booklets come in black and white or colour, on 80gsm Budget (up to 200 pages), or 100gsm Standard and 120gsm Premium (up to 80 pages).
Booklets suit employee handbooks, induction guides, code-of-conduct booklets, new-starter information, customer-service guides, short safety handbooks, brand guidelines and franchise induction material. Once the document needs to lie flat or have pages swapped out, ring binding or hole punching becomes more practical.
Booklet, ring binding or hole punch: which is better?
| Requirement | Booklet | Ring-bound document | Hole-punched for a binder |
|---|---|---|---|
| Publication-style appearance | Excellent | More functional | Functional |
| Short employee handbook | Excellent | Also possible | Possible |
| Long training manual | Limited by paper | Better suited | Good |
| Needs to lie open during use | Good | Very good | Very good |
| Pages replaced often | No | No | Excellent |
| A3 pages | No | Check when ordering | Yes |
A 24-page induction handbook is a natural booklet. A 180-page operations manual with checklists and procedures fits ring binding better. A manual that's updated section by section suits hole punching into a binder.
Should a training manual be black and white or colour?
Use colour where it improves understanding. Black and white suits policy text, procedures, checklists, meeting guides, forms and general instructions. Colour helps with screenshots, software training, safety diagrams, process maps, equipment photos, colour-coded charts, brand guidelines and product training.
Across hundreds of pages and multiple copies, black and white is the more economical choice — but don't convert a colour-coded diagram to greyscale if that makes it harder to understand. If only a few sections need colour, check the ordering options for the best way to set the manual up.
Should a training manual be A4 or A5?
A4 for detailed training content; A5 for compact reference guides. A4 suits SOP manuals, software guides, technical procedures, safety documents, exercises, forms and large diagrams. A5 suits pocket guides, staff handbooks, quick-reference manuals, service standards and short induction material. Don't shrink an A4 manual to A5 if screenshots or tables become hard to read.
When should you use A3 pages?
When content is too cramped at A4: process diagrams, floor plans, workflow maps, large tables, equipment layouts, organisation charts and technical illustrations. A3 is available in black and white or colour, on the same paper range as A4. Use A3 only where the larger area improves comprehension.
What paper should you use for a training manual?
A4 and A3 document printing is available on 80gsm Budget, 100gsm Standard, 120gsm Premium, 200gsm and 300gsm; A5 on 80, 100 and 120gsm. Lighter stock suits large manuals, high page counts, internal copies and documents that change regularly. Heavier stock suits short handbooks, presentation copies and guides that need a more substantial feel — and 200gsm or 300gsm works well for section dividers and covers. For a 200-page manual, unnecessarily heavy paper makes the document awkward.
What paper should you choose for a booklet handbook?
| Paper | Maximum booklet pages |
|---|---|
| 80gsm Budget | 200 |
| 100gsm Standard | 80 |
| 120gsm Premium | 80 |
Plan paper thickness and page count together. If your handbook is longer than the selected stock allows, use 80gsm, edit the document, split the content or switch to ring binding.
How do booklet page counts work?
Folded booklets work in multiples of four pages, because every folded sheet makes four pages. A five-page file becomes an eight-page booklet with three blanks. Useful counts include 4, 8, 12, 16, 20, 24, 28, 32, 40, 60 and 80. Plan blank pages yourself: a designed notes page is better than an unexplained blank at the back.
Does the cover count as a booklet page?
Yes. A 16-page handbook might run: front cover, welcome, company overview, workplace expectations, conduct, WHS, leave information, IT/security, customer standards, training, performance, wellbeing resources, contacts, staff checklist, inside back cover and back cover.
Should you supply booklet pages as spreads?
No. Supply single pages in reading order (page 1, 2, 3, 4...), not printer spreads like 16 | 1, 2 | 15. The page arrangement for folding is handled in production; manual imposition can scramble the order.
Should a training manual be supplied as one PDF?
Yes. Multiple uploaded files may print out of order, so upload one ordered PDF. Use a clear name like Employee-Handbook-2026-APPROVED.pdf rather than cover-final.pdf, policies-v4.pdf and new-starter-pages.pdf.
How should you structure an employee handbook?
A practical structure: welcome, about the organisation, employment basics, workplace conduct, work health and safety, leave and attendance, technology and security, customer service, training and development, internal processes and useful contacts. The exact content depends on your organisation and its obligations.
From a print perspective, the key is navigation: clear section headings, page numbers, a contents page, consistent headers, tables, short checklists and section dividers. The handbook should keep working as a reference after induction day.
How should you structure a training manual?
Use a task-oriented pattern for each procedure:
- Objective — what the employee should be able to do
- Why it matters — short context
- Steps — numbered sequence
- Example — screenshot, photo or worked example
- Common mistakes — what to avoid
- Check — a short checklist or exercise
Should procedures be numbered?
Yes, when order matters:
- Disarm the alarm.
- Switch on the front-of-house lighting.
- Start the point-of-sale terminals.
- Complete the opening safety check.
- Unlock customer entry at the approved opening time.
Numbered steps are easier to follow and easier for a trainer to reference: "Check step four."
Should manuals include checklists?
Yes — opening and closing checklists, safety checks, equipment cleaning, new-starter tasks, complaint processes and emergency procedures. Keep them visually distinct from explanatory text, and leave space if staff need to tick items.
Should training manuals include screenshots?
Yes, for POS systems, CRM software, booking platforms, payroll systems, internal apps and inventory software. Keep them large enough to read, crop to the relevant area and pair them with numbered instructions. A screenshot with 30 tiny labels won't become useful just because it's on an A4 page.
Should manuals use colour-coded sections?
Colour helps navigation when used consistently — Blue: Customer Service · Green: Operations · Orange: Safety · Purple: Administration. But keep section names visible too, because some copies may be black and white, colour vision varies and scans can lose colour. Use colour as a supporting cue, not the only one.
How often should an employee handbook be reprinted?
When it no longer reflects approved content: policy changes, new procedures, updated contacts, new branding, new safety information, software changes, role changes or relevant regulatory updates. If the handbook changes every two months, short runs of standard A4 or A5 documents — or hole-punched sections in a binder — are more practical than a large booklet run.
How can you reduce waste when policies change?
Separate information by how often it changes:
- Core handbook: stable organisation-wide information
- Procedure manual: operational instructions updated as needed — hole-punched so sections can be swapped
- Quick-reference insert: frequently changing contacts or software steps
- Online resource: live policies and forms
One small update then doesn't force you to replace the whole manual.
Should you put version numbers on manuals?
Yes. For example, Employee Handbook — Version 3.2 — Updated September 2026, or Store Operations Manual — Issue 5 — Effective 1 October 2026. Put it on the front cover, inside cover, footer or a document-control page; controlled manuals may also list owner, approval date, effective date and next review date.
How do you stop old manuals staying in circulation?
- Approve the new manual.
- Create one master PDF.
- Archive the old file.
- Give the new PDF a clear version number.
- Order replacement copies.
- Collect or mark old printed manuals as obsolete.
Printing a new version doesn't remove the old one from desks, lockers and training rooms. Treat physical copies as part of version control.
Should training manuals be single- or double-sided?
Both are available. Double-sided makes a long manual much thinner and suits reference material where compactness matters. Single-sided suits manuals where participants write notes, each procedure starts on a fresh sheet, pages may be replaced, or exercises need writing space.
How do you handle pages employees need to write on?
Use one-sided worksheets, notes pages, wider margins, blank areas, check boxes and response lines. Or separate the two: a double-sided Training Manual for reference and a single-sided Participant Workbook for exercises.
Should a training manual have a clear cover?
A clear front cover protects the first page while keeping the printed cover visible; a card back gives support during handling. Both are practical for documents reused repeatedly.
Can a training handbook print edge to edge?
No — standard document prints and booklets are fitted to the page with a white border, so don't add bleed or crop marks. Full bleed is rarely needed for an internal manual. If you want an edge-to-edge piece to go with it, such as a welcome flyer or tri-fold quick-reference guide, Flyers and Brochures print full bleed with 3mm bleed.
What file format should you upload?
PDF is recommended. Word and Publisher files are accepted but should be saved as PDF first. Use 150–300dpi images, CMYK colour where relevant and embedded fonts. Workflow: Word / Google Docs / InDesign → PDF → proof PDF → upload.
What should you check after exporting the PDF?
- Total page count and contents page
- Page numbering, headers and footers
- Screenshots, tables and landscape pages
- Checklists and blank pages
- Section breaks
- Version number and contact details
- QR codes and final page
Open the PDF in a different viewer if possible — a 150-page manual can hide a layout problem on one page.
Should fonts be embedded?
Yes. Font substitution can change line wrapping, page breaks, headings, table widths and procedure numbering — and throw contents-page references out.
What resolution should screenshots and images be?
Use 150–300dpi at final size, especially for screenshots, safety diagrams, equipment photos, charts, maps and icons. Use original files rather than images copied from websites or old PDFs.
Should a manual use CMYK?
CMYK makes colour more predictable. It matters little for black-and-white manuals but more for brand colours, photography, safety diagrams and colour-coded process maps.
What should you check in the upload preview?
Files aren't manually checked, so confirm the correct file, page count, A4/A5/A3 size, orientation, single/double-sided setting, colour, finishing and number of copies, with no unexpected blanks or cropped diagrams. If your approved manual has 126 pages and the uploader shows 124, stop before checkout.
How many training manuals should you print?
| Use | Copies |
|---|---|
| Current employees | 35 |
| New starters | 10 |
| Managers | 5 |
| Training room | 5 |
| Spare copies | 5 |
| Total | 60 |
If the document changes often, don't print a year's supply. Shorter runs mean fewer obsolete manuals.
Should every employee get a printed handbook?
A hybrid often works: printed copies for training rooms, new starters, supervisors and work areas; a digital copy for searchable reference, remote staff, live policies and rapid updates. Paper helps where it's useful without being the only source of truth.
How can you keep training-manual printing efficient?
- Use black and white where colour adds little.
- Print double-sided where practical.
- Use booklet printing for shorter manuals.
- Use ring binding or hole punching where it improves usability.
- Print only the copies you need.
- Separate frequently changing content — don't reprint 150 pages because one phone number changed.
- Finalise before ordering — one version-control mistake undoes every other saving.
Plan around training dates
For new-starter inductions, training sessions, site launches, policy rollouts and franchise openings, get the manual approved and proofed well ahead of the date it's needed. Printing should never replace proper document approval.
What are the most common training manual printing mistakes?
Choosing a booklet for a manual that needs to lie flat. Use ring binding.
Choosing heavy booklet paper before checking page limits. 100gsm and 120gsm max out at 80 pages.
Uploading several files for one manual. They may print out of order.
Sending booklet spreads. Supply single pages in reading order.
Making screenshots too small. Diagrams must be readable.
Printing every page in colour. Use colour where it supports learning.
Forgetting the version number. Staff need to know which manual is current.
Printing too many copies of changing procedures. Match quantity to update frequency.
Expecting documents or booklets to print edge to edge. They keep a white border.
Not checking the upload preview. Files aren't manually checked.
Frequently asked questions about training manual and employee handbook printing
Can Print Online bind an employee handbook?
Yes. Plastic ring binding is available with no covers, a clear front cover, a card back, or a clear cover and card back. Corner stapling and 2- or 4-hole punching are also available.
Can an employee handbook be printed as a booklet?
Yes — A4 or A5, black and white or colour, up to 200 pages on 80gsm or 80 pages on 100gsm and 120gsm.
Should a training manual be single- or double-sided?
Double-sided for compact reference manuals; single-sided for workbooks or documents needing handwritten notes.
What format should I upload?
One final PDF, with 150–300dpi images, CMYK colour where appropriate, embedded fonts and no crop marks.
Can I print A3 training diagrams?
Yes, in black and white or colour, on 80gsm to 300gsm.
How do I keep a manual easy to update?
Hole-punch it for a ring binder so individual sections can be reprinted and swapped.
Print your training manual or employee handbook with Print Online
A good training manual needs to be easy to navigate, readable during real work and simple to keep current.
For a shorter handbook, consider an A4 or A5 booklet — up to 200 pages on 80gsm, or 80 on 100gsm and 120gsm. For a longer operational or training manual, A4 printing with plastic ring binding is usually more practical, and hole punching suits manuals that change section by section. Use A3 selectively for diagrams and wide tables, and choose colour only where it improves understanding.
Whichever format you choose, create one approved master PDF, add a visible version number, check page order and screenshots, and inspect the upload preview before ordering.
